Samick LMH20LUU Linear bearings

Days to Ship:6 Days or more; B:22.2; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):4800; Rolling Element Material:Bearing Steel; RoHS:6; Seal:Nitrile; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease;

Bearing Retained:Yes (with retaining; Number of Bearings:Single; Flange Shape:Round Type; Shape:Flange Type; Volume Discount:Available; Bearing Part Number:6802; Type:Bearings with Housin; Flange O.D. H(φ):47; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;

Dynamic load, C:1,220 kN; Da max:276 mm; D:290 mm; Min operating temperature, Tmin:-40 °C; k:8 mm; B:80 mm; b:16.9 mm; Characteristic inner ring frequency, BPFI:10.4 Hz; da min:174 mm; Number of lubrication holes:3;

Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Flange O.D. H(φ):47; Shape:Flanged Pilot Type; Flange Shape:Round Type; Shape:Flanged Pilot Type; Bearing Part Number:6900; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Type:Bearings with Housin;

RoHS:6; Bearing Part Number:6902; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Shape:Bottom Mount; Holder Surface Treatment:Black Oxide Coating; Shape:Bottom Mount;

O.D. D(φ):17; Application:For Inner Ring; L Dimension Tolerance:Positive Tolerance; Material:304 Stainless Steel; I.D. d(φ):10; Days to Ship:7 Days or more; L(mm):2 ～ 100; RoHS:6; Application:For Inner Ring;

da max:119 mm; Characteristic rolling element frequency, BSF:5.15 Hz; da min:108 mm; Mass (without HJ ring):6.58 kg; rs min:3 mm; Brand:NTN; Static load, C0:385 kN; Characteristic outer ring frequency, BPF0:5.69 Hz; Characteristic cage frequency, FTF:0.41 Hz; ra max:2.5 mm;

Volume Discount:Available; Days to Ship:7 Days; Type:Bearings with Housin; Flange O.D. H(φ):51; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Flange Shape:Compact Type; Width T(mm):12; Seals:ZZ (Double Shield);

s1:13.5 mm; SW:3.18 mm; Weight:0.58 kg; C:14 kN; A3:1.5 mm; T min.:-20 °C; Designation of housing:C205-; S:7.5 mm; A5:19.5 mm; A:22 mm;

Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):25700; Fit:J7; Unit Body Material:Cast Iron; Stroke:No; Accessory:No Cover; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease;

B1:44.3 mm; d1:37.4 mm; A2:45.9 mm; Designation of housing:FLZ205-; T max.:100 °C; S:17.4 mm; Weight:0.75 kg; H:124 mm; C:14 kN; Recommended tightening torque for set screw:3.7 Nm;

Recommended tightening torque for set screw:8 Nm; N:M14; L1:30 mm; C:19.5 kN; Designation of housing:PA206-; J:66 mm; d:30.16 mm; s1:34.1 mm; T min.:-20 °C; A1:25 mm;

d1:55 mm; C0:19.2 kN; Designation of bearing:EX307-20G2T20; C:33.5 kN; S:18.3 mm; Weight:2.16 kg; G:M6x1; A1:16 mm; Recommended tightening torque for set screw:8 Nm; d:31.75 mm;

Weight:1.03 kg; Recommended tightening torque for set screw:8 Nm; Designation of bearing:EX305-16G2T04; B1:46.8 mm; A5:18.2 mm; A:26 mm; A3:2.5 mm; T max.:100 °C; Designation of housing:C305-; S:16.7 mm;